Lattice sizes (m L x m W)

1.8 x 0.6	2.4 x 0.6	3 x 0.6
1.8 x 0.9	2.4 x 0.9	3 x 0.9
1.8 x 1.2	2.4 x 1.2	3 x 1.2
1.8 x 1.5	2.4 x 1.5	3 x 1.5
1.8 x 1.8	2.4 x 1.8	3 x 1.8

(Removing the perimeter staples will substantially weaken
the structure and make the warranty void.)

Materials used

• 38 mm x 10 mm CCA fine sawn batten
• 38 mm x 13 mm CCA fine sawn dressed pencil round battens.
  (bullnose batten)

Made-to-measure lattice:

Our wide range of lattice styes can be made to your size.

Our lattice panels are strengthened by double stapling around the perimeter, using either galvanised or stainless steel staples, depending on your requirements.

Made-to-measure framed lattice:

Timber & Lattice’s made-to-measure service can pre-frame your lattice panels with lattice channel (70 mm x 35 mm or 90 mm x 45 mm) and handrails for balustrade panelling to suit your exact size.

Our made-to-measure framed-up lattice panels are made to fit your pergola perfectly.

Our free-standing lattice fence panels are an effective way to screen an old fence, trail a climbing plant over or create privacy.

Custom Made Machined / Architectural:

Timber and Lattice have an up to date computer timber machine shop, for all your special out of the ordinary jobs.

We are limited by your imagination!

Painting service:

Avoid the mess and hassle of painting your own lattice by using Timber and Lattice’s specialist painting service.

All you have to do is choose the colour.

Gothic / closed diamond

• Approx. 50 mm gap
• 38 mm x 10 mm fine sawn treated pine
• 19 mm x 6 mm galvanized staples
• 38 mm x 12 mm fine sawn bullnose treated pine
  - stainless steel staples
• Double stapled at perimeter
  

Open diagonal traditional

• Approx. 100 mm gap
• 38 mm x 10 mm fine sawn treated pine
• 19 mm x 6 mm galvanized staples
• 38 mm x 12 mm fine sawn bullnose treated pine
  - stainless steel staples
• Double stapled at perimeter

Colonial / closed square

• Approx. 50 mm gap
• 38 mm x 10 mm fine sawn treated pine
• 19 mm x 6 mm galvanized staples
• 38 mm x 12 mm fine sawn bullnose treated pine
  - stainless steel staples
• Double stapled at perimeter

The same patterns can be made with 38 mm x 13 mm bullnose battens to add additional flair to timber lattice. We make this with stainless steel staples. Bullnose battens have an excellent finish when painted.